Toshiba JK 720 Instruction Manual page 19

Ampere medium voltage controllers

Table of Contents

Basic Installation and Operation Guide

NOTE: Covers and braces supplied only for protection during shipment should not be replaced. All debris

and tools should be removed from each compartment as cabling is completed.

Remove part number identification or any label on the splice bus before installation.

Tighten and torque the bolts for all bus splice connections and other bus if loosened

during installation of the bus splice.

TOSHIBA

Fig. 11 Main Bus Splice Connections - 1200A Main Bus

Fig. 12 Main Bus Splice Connections - 2000A

(Consult Factory For 3000A Main Bus Splice)

JK Series 720 Controllers

Table of Contents

Jk series