Brother 888-P20 Operation Manual page 39

c Select the satin stitch frame pattern of the same shape
as the appliqué. Embroider over the appliqué and base
b
fabric from step to create the appliqué.
■ Method 2
a Select a straight stitch frame pattern, and embroider
the pattern onto the base fabric.
b Place the appliqué fabric over the pattern embroidered
a
in step and embroider the same pattern on the
appliqué fabric.
• Be sure that the appliqué fabric completely covers
the stitched line.
c Remove the embroidery frame from the embroidery
unit, and cut around the outside of the stitches of the
appliqué fabric.
Note
• Do not remove the fabric from the embroidery
frame to cut it. Also, do not pull or push on the
fabric. Otherwise, the fabric may loosen in the
frame.
d Reattach the embroidery frame to the embroidery unit.
e Select the satin stitch frame pattern of the same shape
as the appliqué and embroider the satin stitch pattern
to create an appliqué.
• Do not change the size or position of the pattern.
Embroidering
2
37