Omron BP4350 Instruction Manual page 35

Display/
Problem
appears or the
monitor is
turned off
unexpectedly
during a
measurement
No power.
Nothing
appears on the
display of the
monitor.
Readings
appear too high
or too low.
Any other
communication
issue occurs.
Any other
problems occur.
Possible Cause
Batteries are depleted.
Batteries are completely
depleted.
Battery polarities are not
properly aligned.
Blood pressure varies constantly. Many factors including stress,
time of day, and/or how you apply the wrist cuff, may affect your
blood pressure. Review sections 2.3 - 2.5 and chapter 3.
Follow the instructions shown in the smart device, or visit the
"Help" section in the app for further help.
If the problem still persists, contact customer service. Refer to
chapter 11.
Press the [START/STOP] button to turn the monitor off, then
press it again to take a measurement. If the problem continues,
remove all batteries and wait for 30 seconds. Then re-install
batteries.
If the problem still persists, contact customer service. Refer to
chapter 11.
Immediately replace all batteries with
2 new alkaline batteries. Refer to
section 2.1.
Check the battery installation for
proper placement. Refer to
section 2.1.
35
Solution