Phonebook; Store A Name And Number - Motorola E2 Series Manual

4.

Phonebook

You can store up to 50 names and numbers in the phonebook. Names can be up
to 12 characters long and numbers up to 24 digits.
4.1

Store a name and number

If the E2 is connected to a switchboard, you may need to enter a pause in a stored
number. This gives the switchboard time to find an outside line.
A pause is normally stored after the switchboard access code (e.g. 9). When
storing a number, press and hold
continue entering the phone number.
If you have subscribed to Caller ID Service and wish to display the name of your
caller instead of the number, save the full telephone number including the area
code to your phonebook.
You can store multiple entries with the same name. However, to prevent
M
unnecessary duplicated entries, you can only store the number once.
M
1. Press . The display shows PHONEBOOK.
M
2. Press , scroll
3. Press . The display shows
4. Enter the name and press
5. Enter the number and press
6. The display shows
7. Enter the next name and number entry that you wish to store in your
phonebook or press
Entering names
Use the keypad letters to enter names, e.g. to store TOM:
8
Press once to enter T.
6
Press three times to enter O.
6
Press once to enter M.
Writing tips
B
Press to delete the last character or digit.
u
d
Press or to move between characters or digits.
1
Press to insert a space.
1
Use twice to insert a dash.
20
#
until the display shows P. You can then
d
to ADD NEW.
M
ENTER
M
. The display shows
to save.
ADD NEW.
e to return to standby.
NAME.
ENTER NUMBER.
Phonebook