Motorola E2 Series Manual page 12

D Menu / OK / Mute
Press to open the Menu.
Press to select menu options and to confirm a displayed option.
During a call, press to turn mute on / off.
E Talk / Hands-free
Press to switch hands-free on or off during a call.
Press to make and receive calls.
F * / Intercom / Pulse to Tone dialling
Dial a *.
Used to make internal calls and transfer calls to other E2 handsets registered
to the base.
Press to switch from pulse dialling to tone dialling.
G Recall
Use with switchboard / PABX services and some network services. When on
an external call, press to access a Call Waiting Line when you hear the call
waiting prompt signal. Press again to toggle between the two calls.
Press to get a fresh dial tone.
H Redial
In standby mode, press to open the redial list.
I Phonebook / Delete / Back
In standby mode, press to open the phonebook menu.
In editing mode, press to delete characters and digits.
Go back to the previous menu level.
J End Call / Exit / Switch Handset on / off
Press to end a call.
When viewing the redial / calls list / phonebook or when in the menu, press to
exit and return to standby.
Press and hold for 5 seconds to switch off the handset.
K Call list / Down
In standby mode, press to open the calls list.
During a call, press to decrease earpiece volume.
When the phone is ringing, press to decrease the handset ringer volume.
Press to scroll through the menu options, redial list, calls list and
phonebook entries.
L Keypad lock
Press and hold to lock and unlock the keypad.
M Pause / #
Press and hold to enter a pause (P) when pre-dialling or storing numbers.
Dial a #.
N Do Not Disturb
Press to automatically turn on Do Not Disturb.
Press and hold to enter the call block menu.
O Microphone
12
Getting to know your phone