Brother FAX218 Service Manual page 113

Selector
No.
1 Definition of programmable key
2 Ringer OFF setting
Automatic playback of OGM at the
3
start time of OGM ON mode
Detection of distinctive ringing
4
pattern
5
| Not used.
7
8 Motor overheating error indication
NOTE: Selector 1 is not applicable to the U.S.A. versions.
NOTE: Selectors 3 and 6 are applicable to those models equipped with a built-in TAD.
Selector 1: Definition of programmable key
This selector defines a programmable key as a TEL key or TEL/POLLING key.
Setting this selector to "1" allows the programmable key to function as either a TEL or POLLING
key if pressed when the handset is off or on the hook, respectively.
This setting is effective only for those models having a programmable key.
Selector 2: Ringer OFF setting
This selector determines whether or not the ringer can be set to OFF.
Selector 3: Automatic playback of OGM at the start time of OGM ON mode
This selector determines whether or not the equipment automatically plays back an OGM the
moment it switches to the OGM ON mode in the MC mode.
Selector 4: Detection of distinctive ringing pattern
If this selector is set to "1," the equipment detects only the number of rings; if it is set to "0," the
equipment detects the number of rings and the ringing time length to compare the detected ringing
pattern with the registered distinctive one.
Selector 8: Motor overheating error indication
If this selector is set to "0," the equipment displays the message "PRINTER FAULT" on the LCD
whenever a motor overheating error occurs so that any of the following happens and the equipment
aborts recording:
- The number of printed documents is five or less although the receiving operation continues for 15
minutes or more.
- The umber of printed documents is 10 or less although the receiving operation continues for 20
minutes or more.
WSW27
(Function setting 5)
Function
V - 40
Setting and Specifications
0: TEL key 1: TEL/POLLING key
0: Yes 1: No
0: No 1: Yes
0: Yes 1: No
0: No 1: Yes