Selecting Operation Mode - D-Link DIR-882 Quick Installation Manual

Ac2600 wave 2 mu-mimo wi-fi gigabit router with 3g/lte support and 2 usb ports

Hide thumbs Also See for DIR-882:

Table of Contents

DIR-882

Quick Installation Guide

Selecting Operation Mode

Select the needed operation mode and click the NEXT button.

Router

In order to connect your device to a wired ISP, on the Device mode page,

from the Connection method list, select the Autonomous value. Then

from the Work mode list, select the Router value. In this mode you can

configure a WAN connection, set your own settings for the wireless network

in the 2.4GHz and 5GHz bands, configure LAN ports to connect an STB or

VoIP phone, and set your own password for access to the web-based interface

of the device.

Table of Contents