D-Link DIR-882 Quick Installation Manual page 56

DIR-882
Wireless Module Parameters
Advanced functions
Wireless connection rate
7 Maximum wireless signal rate is derived from IEEE standard 802.11ac and 802.11n
specifications. In order to get the rate of 800Mbps in the 2.4GHz band, a Wi-Fi client
should support MIMO 4x4 and QAM256 modulation scheme. Actual data throughput
will vary. Network conditions and environmental factors, including volume of network
traffic, building materials and construction, and network overhead, lower actual data
throughput rate. Environmental factors will adversely affect wireless signal range.
·
Super Mesh function
·
Support of client mode
·
WMM (Wi-Fi QoS)
·
Information on connected Wi-Fi clients
·
Advanced settings
·
Smart adjustment of Wi-Fi clients
·
Guest Wi-Fi / support of MBSSID
·
Limitation of wireless network rate
·
Periodic scan of channels, automatic switch to least
loaded channel
·
Support of 2.4GHz/5GHz TX Beamforming
· Wider bandwidth (up to 160MHz)
·
Autonegotiation of channel bandwidth in accordance
with environment conditions (20/40 Coexistence)
· CoovaChilli authentication portal
·
IEEE 802.11a: 6, 9, 12, 18, 24, 36, 48, and 54Mbps
7
·
IEEE 802.11b: 1, 2, 5.5, and 11Mbps
·
IEEE 802.11g: 6, 9, 12, 18, 24, 36, 48, and 54Mbps
·
IEEE 802.11n (2.4GHz): 6.5–600Mbps (MCS0–MCS30)
to 800Mbps (QAM256)
· IEEE 802.11n (5GHz): from 6.5 to 600Mbps (from MCS0
to MCS30)
· IEEE 802.11ac (5GHz): from 6.5 to 1733Mbps (from
MCS0 to MCS9)
Quick Installation Guide
56