Fujitsu ASYG36KMTA Design & Technical Manual page 31

NOTES:
• The air conditioner custom code is set to
• If you do not know the air conditioner custom code setting, try each of the custom codes ( →
→ → ) until you find the code that operates the air conditioner.
¢ Contents of function setting
Each function setting listed in this section is adjustable in accordance with the installation environ-
ment.
NOTE: Setting will not be changed if invalid numbers or setting values are selected.
 Function setting list
Function no.
1) 00
2) 11
3) 30/31
4) 35/36
5) 40
6) 42
7) 44
8) 46
9) 48
10) 49
1) Remote controller address setting
NOTE: Because this setting is normally done automatically when 2-wire-type wired remote con-
troller is installed, setting is unnecessary.
Multiple indoor units can be operated by using one wired remote controller.
Set the unit number of each indoor unit.
Function number
00
NOTE: When different type of indoor units (such as wall mounted type and cassette type, cassette
type and duct type, or other combinations) are connected using group control system, some
functions may no longer be available.
11-1. Function settings by using remote controller
prior to shipment.
Remote controller address setting
Filter sign
Room temperature control for indoor unit sensor
Room temperature control for wired remote controller sensor
Auto restart
Room temperature sensor switching
Remote controller custom code
External input control
Room temperature sensor switching (Aux.)
Indoor unit fan control for energy saving for cooling
Setting value
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
Functions
Setting description
Unit no. 0
Unit no. 1
Unit no. 2
Unit no. 3
Unit no. 4
Unit no. 5
Unit no. 6
Unit no. 7
Unit no. 8
Unit no. 9
Unit no. 10
Unit no. 11
Unit no. 12
Unit no. 13
Unit no. 14
Unit no. 15
- 27 -
Factory setting
♦
11. Function settings