Adjustment - Kenwood TK-5220 K Service Manual

Note:
• When a new printed circuit board is used, the Kenwood
ESN changes, as does the Transceiver Information dis-
play of the KPG-112D, but this does not have any effect
on the operation of the transceiver.
• If changing to the original Kenwood ESN and P25 ESN,
please contact our service center.
Controls
Selector
Power switch / Volume
Orange key
PTT switch
Side1 key
Side2 key
TROUBLE SHOOTING
Note: A UPC code and UPC barcode is not printed on the
Kenwood ESN Label. If necessary, cut the label at the cut-
off line and attach only the serial number.

ADJUSTMENT

Panel Test Mode
■ Test mode operation features
This transceiver has a test mode. To enter test mode,
press and hold the [ ] key while turning the transceiver
power ON. Before the transceiver enters test mode, the
frequency version information appears on the LCD mo-
mentarily. Test mode can be inhibited by programming. To
exit test mode, turn the transceiver power OFF. The follow-
ing functions are available in test mode.
Universal
connector
TK-5220
(Not used)
P25 ESN Label
Kenwood
ESN Label
(Not used)
(Not used)
35