Table of Contents
Advertisement
ü If you are connected to a DHCP Server or Router,
select 'Obtain an IP address automatically'. You will be
given an automatic IP Address and Subnet Mask.
9) Referring back to the Step 7) figure, click the
'Advanced' Tab. Disable 'Internet Connection Firewall'
by un-checking the box.
ü If you use Service Pack 2, refer to the following figures.
Click 'Settings' at 'Windows Firewall'
Check 'Off' and click 'OK'
10) Set the network configurations of MEDIAGATE T1.
ü You must connect MEDIAGATE T1 to a TV set for this
setup. See "3.1.1 Connect Video Cable".
Press [SETUP] on MEDIAGATE T1 remote control to
display the Setup screen. Select DHCP: Off and
enter the IP address & Subnet mask you want to use.
For example, you may enter:
IP Address: 192.168.001.002
Subnet mask: 255.255.255.0
After entering the IP Address and Subnet, press
[SETUP] again to save configurations.
52
Advertisement
Table of Contents
