Direct Connection Via Cross-Over - Pogo MediaGate T1 User Manual

2.2.3 Direct connection via Cross-Over

MEDIAGATE T1 can connect directly to your TiVo® box via a cross-over LAN cable.
ü A cross-over Ethernet LAN cable (sold separately) will be required for this setup.
ü Please refer to your TiVo® owners manual on how to manually specify an IP Address and Subnet Mask on your TiVo® box. This
will be necessary for a direct connection.
1. Press [SETUP] in Mode Selection screen.
4. Select 'IP Addr' and press [ENTER]
The IP address Input box will be displayed. Enter
the IP address with the arrow and number
buttons on the remote control. We recommend
using the IP Address shown in the example.
Press [ENTER].
<DHCP Off Setup Procedure>
2. Select the 'Network' icon and press [ENTER].
Setup box will be displayed under the icon menu.
3. Move to DHCP Off and press [ENTER].
5. Select 'Subnet' and press [ENTER].
The Subnet mask Input box will be displayed.
Enter the Subnet mask with the arrow and
number buttons on the remote control. We
recommend using the subnet shown in the
example. Press [ENTER].
6. Press [SETUP] to save the configurations.
35