Table of Contents
Advertisement
1.2.2 Audio Setup
This is a guide for setting the audio output of your MEDIAGATE T1. You can use Stereo or Digital 5.1 ch.
ü Analog /DCPM: Select when you connect the supplied audio cables (Red / White) to TV or Audio set directly.
ü Encoded Digital: Select when you want to listen through 5.1Ch / DTS Dolby by connecting receiver (or amplifier) with Optical or
Coaxial cable.
1. Press [SETUP] in the Mode Selection screen.
<Setup Procedure>
2. Select the 'Audio' icon and press [ENTER].
Setup box will be displayed under the icon menu.
3. Select the Audio Output Mode that you want
and press [ENTER].
4. Press [SETUP] to save configurations.
11
Advertisement
Table of Contents
