Windows Me - Pogo MediaGate T1 User Manual

3.2.2 Windows ME

1) After connecting MEDIAGATE T1 to your computer
and plugging in power cable, Windows will install the
driver automatically. Check the driver installation by
going to [Start menu, Settings, Control Panel, (view
all Control Panel options), System, Device Manager,
Universal Serial Bus controllers] You should see a
USB Mass Storage Device.
2) Check 'My Computer' or 'Explorer', there should be
a new hard drive designated volume. You can copy
any data to this volume.
ü If a new volume does not appear, check HDD format
and HDD file system. Windows ME will only detect
FAT32 file system.
3) After copying data, remove MEDIAGATE T1 by
using remove icon at task bar on the lower right
hand corner of your screen. If you do not follow this
procedure, data and MEDIAGATE T1 may be
damaged.
41