1020 M.2 Solid-State Drive, Bracket, And Thermal Pad (For Selected Models) - Lenovo 21F6005GGE Hardware Maintenance Manual

Applying labels to the base cover assembly
Notes:
• Depending on the country or region of delivery, the labels might be slightly different from the ones in the
following illustration.
• The new base cover assembly FRU is shipped with a kit containing labels of several kinds. Apply those
labels when you replace the base cover assembly. For the labels that are not shipped with the new base
cover assembly, peel them from the old base cover assembly, and adhere them to the new one.
Label locations on the base cover assembly
Item
1
SVT label
3
IMEI label
5
Serial number label
7
Asset tag label
1020 M.2 solid-state drive, bracket, and thermal pad (for selected
models)
For access, remove this FRU:
• "1010 Base cover assembly" on page 60
Attention: The M.2 solid-state drive is sensitive. Inappropriate handling might cause damage and
permanent loss of data.
When handling the M.2 solid-state drive, observe the following guidelines:
• Replace the M.2 solid-state drive only for repair. The M.2 solid-state drive is not designed for frequent
changes or replacement.
• Before replacing the M.2 solid-state drive, make a backup copy of all the data that you want to keep.
• Do not apply pressure to the M.2 solid-state drive.
• Do not touch the contact edge or circuit board of the M.2 solid-state drive. Otherwise the M.2 solid-state
drive might get damaged.
Item
2
Country label
4
Genuine Microsoft label (Windows 10)
6
COA label
.
Chapter 8 Removing or replacing a FRU
61