Using The Scanner Button - Plustek SmartPhoto P60 User Manual

Contrast – adjusts the tonal range of an image by lowering mid-tone values and
increasing values for high and low tones. The higher the contrast, the sharper the
image will be. The lower the contrast, the blurrier an image will be.
Gamma – Use the slider to adjust the image gamma for the scanned image.
Gamma values are primarily a measure for the color brightness. The larger the
gamma value, the brighter the color becomes. Changing the image's gamma
value allows you to change the brightness of the colors IN THE IMAGE ITSELF.
Continuous Scan – When you scan a number of pages consecutively, the
scanner will automatically detect the original you insert in the scanner and perform
scanning, without your pressing the scanner button every time.
Save Setting
File Format - JPG (JPEG): (Joint Photographic Experts Group) JPEG
(pronounced "jay-peg) is a format that is commonly used for color images
displayed on the Internet. JPEG reduces the file size of an image by discarding
some of the non-critical data of the image. JPEG retains all of the color
information of an image and offers varying degrees of compression.
File Name Prefix - The file name of the scanned images will be a combination of
your own defined file name prefix and the four digits number issued by the system.
Save - This setting is for saving the scanned image(s) to a specified folder for
further management. Clicking the Browse button to choose a destination folder,
you may view, edit, or manage the scanned images later in a more efficient way.

Using the Scanner Button

With a simple touch of button on the scanner, you can conveniently scan originals into
image files.
Default button settings are optimized for most frequently scanning jobs, such as
resolution, brightness, and gamma. You may, however, change the settings as the
methods described ibid to tailor your every scan by accessing the DigiPhoto window.
The Scan button can automate a scanning and proceed saving the scanned image(s)
to a predefined destination.
To use the Scan button, please follow the steps:
1. Make desired adjustment in the DigiPhoto Settings window. (Please refer to
the DigiPhoto section for more information on adjustments.)
13
1. SCAN Button