Advertisement
Quick Links
Advertisement
Related Manuals for Amada ITH-1050C6W
Summary of Contents for Amada ITH-1050C6W
- Page 1 INVERTER WELDING TRANSFORMER ITH-1050C6W OPERATION MANUAL Y02OM1189298-03...
-
Page 2: Table Of Contents
ITH-1050C6W Thank you for purchasing our Inverter Welding Transformer ITH-1050C6W. ・ This operation manual explains its method of operation and precautions for use. ・ Before using, read this operation manual carefully; after reading, save it in a proper place where you can easily access. -
Page 3: Special Precautions
ITH-1050C6W 1. Special Precautions (1) Safety Precautions CAUTION Before using, read “Safety Precautions” carefully to Denotes operations and practices that understand the correct method of may result in personal injury or damage to use. the equipment if not correctly followed. - Page 4 ITH-1050C6W WARNING Do not put your hands between the electrodes. When welding, keep your fingers and hands away from the electrodes. Ground the Transformer. If the Transformer is not grounded, you may get an electric shock when there is trouble, or when electricity leaks.
- Page 5 ITH-1050C6W CAUTION Do not use this Transformer for any purpose other than welding. Use of this Transformer in a manner other than specified can cause electric shock and fire. Use proper tools (wire strippers, pressure wire connectors, etc.) for termination of the connecting cables.
- Page 6 ITH-1050C6W (2) Precautions for Handling ・ When transporting or moving the Transformer, do not lay it down. Also, handle the Transformer with care so as not to make an impact such as drop on it. ・ Install this Transformer securely on a firm and level surface. If it is inclined malfunction may result.
-
Page 7: Names And Functions Of Each Section
ITH-1050C6W 2. Name and Functions of Each Section [+] terminal * Front panel Connect the positive (+) cable of the welding head to this terminal. [-] terminal * Connect the negative (-) cable of the welding head to this terminal. -
Page 8: Installation And Connection
3. Installation and Connection ● Place for installation Slits are provided on rear side and bottom of the ITH-1050C6W for higher heat radiation efficiency. Install this transformer in a well-ventilated place and make a clearance of at least 10 cm from the surrounding walls to extract the full performance. - Page 9 ITH-1050C6W 3. Installation and Connection...
- Page 10 ITH-1050C6W 3. Installation and Connection...
-
Page 11: Specifications
ITH-1050C6W 4. Specifications Rated capacity 40.7 kVA 200–240 V AC of welding power supply: 300 V, 1 kHz Input voltage 380–480 V AC of welding power supply: 600 V, 1 kHz No-load secondary 200–240 V AC of welding power supply: 15 V/7.5 V voltage 380–480 V AC of welding power supply: 15 V... -
Page 12: Troubleshooting
ITH-1050C6W 5. Troubleshooting Contents Cause Measures Fan motor does not work. Consult us or your distributor. ITH-1050C6W becomes hot Clean up cooling water circuit, abnormally. Cooling water does not flow. especially cooling water hose. Secondary cables are not connected correctly. -
Page 13: Outline Drawing
ITH-1050C6W 6. Outline Drawing (Dimensions in mm) Outlet 6. Outline Drawing... -
Page 14: Duty Cycle Graph
ITH-1050C6W 7. Duty Cycle Graph Ambient temperature: 40°C Cooling water temperature: 35°C 10000 (10000A at 3.9%) 9000 8000 (7000A at 7.5%) 7000 (5900A at 10%) 6000 5000 4000 (3700A at 20%) 3000 (1800A at 50%) 2000 1000 (1000A at 100%)
Need help?
Do you have a question about the ITH-1050C6W and is the answer not in the manual?
Questions and answers