Programming The Washing Time - Beko BDIN15320 User Manual

OperatIng the product
Inner Illumination
(depends on the model)
Some models have interior lighting to
illuminate the interior when the door is
opened.
Changing the interior lighting
setting
1. After turning on your machine, press
and hold the Time Delay and Start /
Pause / Cancel key for 3 seconds.
2. Press the Time Delay key to switch the
delay indicator to position 9.
3. You can press the function keys to
turn on and off the inner illumination.
The inner illumination is switched to
off position if the 1st programme LED
is on, and to the on position if the 2nd
programme LED is on.
4. Press the On/Off key to exit the
settings menu. Your setting will be
saved automatically.
Floor illumination
Warning to show that machine is
in washing phase
(depends on the model)
Your machine reflects a light to the floor
during the washing process. This light turns
off after the washing process is complete.
C
Floor illumination is activated
automatically when the
washing programme starts and
remains lit until the end of the
programme.
C
Floor illumination cannot be
cancelled by the user.
32 /42 EN
Programming the washing
time
Time Delay
If an economical electricity tariff is applied
in your region, you can use the time delay
function to wash your dishes during
appropriate hours.
You can delay the start of the selected
programme until 9 hours.
C
Hold the delayed start key
pressed for 1 second more than
the other keys.
1. Press the time delay key after selecting
the washing programme and other
auxiliary functions.
2. Once you press the Time Delay key "3
hours" Time Delay indicator will start
flashing.
3. Set the desired time by pressing the
Time Delay key. Each press on the key
will increase up to 9 hours with 3-hour
increments.
4. Close the door of your machine after
setting the Time Delay. Once the delay
time is over, the selected programme
will start automatically.
C
The time delay will start
countdown with the closing
of the door after selecting the
Time Delay function.
C
If the door is opened while the
Time Delay function is active,
the countdown will be paused
and start icon will start to flash.
/