Connect The Convertx To The Pc - Plextor ConvertX PX-AV100U Installation And User Manual

Section 2. Installing Your ConvertX
8. Click Finish to complete the DirectX 9.0 installation.
9. If you have Windows XP: Click Next to install Windows XP
KB822603 for enabling USB Audio capture.

Connect the ConvertX to the PC

IMPORTANT NOTE: In the next steps of this procedure, you will be
installing software for the ConvertX. You'll see the "Found New
Hardware" window more than once. This is normal.
1. You will use a USB cable to connect the ConvertX to your computer
as shown in Figure 7. Begin by making sure your computer is on.
2. Make sure the Plextor disc is in the computer's drive.
3. Connect the USB cable from your ConvertX to the computer. (Your
computer's USB connectors may be on the front panel or in the rear.)
12
Plextor ConvertX PX-AV100U Installation and Users Manual