Rear Panel-Px-708Uf External Drive - Plextor PX-708UF Installation And User Manual

Section 1. Getting Started
Rear Panel—PX-708UF External Drive
Figure 2: Rear panel of the PX-708UF external drive
• L. R audio out RCA jacks: Output of analog stereo signal. Connect
a sound board or audio amplifier here, if desired. Connectors for left,
right channels are standard RCA type. Red connector is right
channel.
• IEEE 1394 4-pin connector: Connect an IEEE 1394 (also known as
FireWire) cable with a 4-pin connector here.
• IEEE 1394 6-pin connector: Connect an IEEE 1394 (FireWire)
cable with a 6-pin connector here.
NOTE: The PX-708UF does not get its power from the IEEE 1394 bus or
the USB bus. It must be connected to the AC adapter.
CAUTION: Use only the IEEE 1394 (FireWire) cable shipped with your
PX-708UF.
10
PX-708UF Installation and Users Manual