Corrosion Caused By Aggressive Chemicals; Glued-In Pipes - System Sensor FAAST LT-200 Setup And Troubleshooting Manual

Examples of internal parts coated by oil from the environment or
from the use of unsuitable paraffin-based test smoke:
Example of corrosion caused by aggressive chemicals
in the environment
This fan stopped working:
This fan's connections have been attacked:
4. Example of glued in pipes.
Example of glued-in pipes
The inlet pipe has had to be cut to remove the unit:
The inlet pipe has had to be cut to remove the unit:
And the glue has run inside, damaging the unit's air path (see the
glue drops on the filter).
And the glue has run inside and damaged the unit's air path (see the glue drops on the
12 I56-6304-000