Advertisement
Place fire glass(I) evenly in fire bowl.
Use caution when handling fire glass as it is sharp.
b) Do not place any fire glass over the screen.
Completely cover the entire burner ring with fire glass .
Failure to completely cover the burner ring with the fire glass will cause flame to extinguish occasionally.
fire glass
pit
Before using fire pit, check for gas leaks.
Perform leak test in a well-ventilated area outside and where no source of spark can occur.
a) After opening door for access, open tank valve fully (counter-
clockwise).
b) Turn control knob to the OFF position.
c) Apply soapy water solution (3 drops dish detergent plus 4 oz.
water) to check all connections for leaks before attempting to light
Fire Table.
d) Coat soapy water onto all connections (shown in figure at right,
1, 2 ,3, 4, 5).
e)
If a leak is found, turn tank valve off and do not use fire pit
until repairs are made.
6b
I
6c
5
4
3
2
1
Advertisement
