Page 1
THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this fire pit. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Safety Information (continued) Read and follow all the instructions and warnings in this Owner’s Manual lmproper installation, use, maintenance, adjustment or storage can cause WARNING Prepare for use: Keep away from combustible/flammable items Do not put any other fireplace cover or anything flammable on or beneath the fire pit. Combustible materials should never be within 1.83 m/6 ft of the top, or within 1.22 m/4 ft of the back or the sides of the fire pit.
Page 4
Safety Information (continued) Observe the flame color and the flame height in the fire pit after being lit: 1.) The flame color should be yellow. 2.) The flame height burns at 2 - 10 inches high. THIS PRODUCT USES PROPANE ONLY propane cylinders with the following required measurements only: 10.16 cm/4 in (diameter) x 20.32 cm/8 in (tall) with a capacity of 0.45 kg/1 lb.
Pre-Assembly Before beginning assembly of the fire pit, make sure all the parts are present. Compare the parts with the package contents list. If any part is missing or damaged, do not attempt to assemble the fire pit. Estimated Assembly Time: 10 minutes NOTE: You must follow all the steps to properly assemble the fire pit.
Assembly Connecting the Propane Tank WARNING This re pit requires air ow under the unit. Do not place on an uneven surface or on grass, turf, or carpet. Make sure the control knob (D) in the “OFF” position and turn door knob(C) to remove the door(B) Place the 1LB propane tank (not included) in o the tank chamberand screw tightly onto the outlet of valve and regulator.
Page 7
Assembly (continued) Installing the Lava Rock WARNING Keep the lava rock (H) and other objects off of the gas screen (F). Holes in the screen must be exposed in order to allow gas to escape. A blocked screen can cause gas to build inside the re pit and ultimately cause an explosion Note that the burner (E) is visible.
Leakage Test Before performing a leak test, be sure that no sparks can occur and you are in a spacious outdoor area. Connect the propane gas cylinder to the regulator and turn the control knob on the unit to the “OFF” position.
Troubleshooting Solution Cause Problem The ignition wire is loose or disconnected to Reinsert the ignition wire. the igniter. There is no spark between The ignition wire does not the ignition wire conduct electricity. and the burner's hole while There is electricity leakage in the ignition pushing the wire or the needle of the ignition wire cannot Call customer service for a replacement part.
Page 10
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
Need help?
Do you have a question about the FP12005 and is the answer not in the manual?
Questions and answers