Plantronics M3000 Pairing Instructions page 27

Making and Accepting Calls
To accept an in-coming call via the M3000 Headset
1. An in-coming call will cause both the phone and the headset to ring.
Note that there may be a delay of a few seconds between the phone
ringing and the headset starting to ring.
2. When you hear the ringing tone in the M3000 headset, press the "Call
Control" button to answer the call.
If you press the "Call Control" button before the headset starts to ring the
call may not be answered and an error tone will sound in the headset.
Once you hear this tone you can then press the "Call Control" button to
pick up the call.
To end a call using the M3000 Headset
The call can be ended either by pressing the "End Call" key on the 6310i
or by pressing the "Call Control" button on the M3000.
To place a call using the keypad:
1. Dial the number as normal and press the "Call" key on the 6310i. The
call can be ended either in the phone or by the headset – see above.
To place a call using Voice Dialing with the M3000 Headset:
NB: Before using the M3000 for voice dialling, ensure that you have
followed the instructions in the Nokia 6310i User Guide for voice dialling,
and that you have recorded the names of the contacts you wish to call via
voice dialling. Place a test call from the 6310i using voice dialling to
ensure that it is working before using the M3000 headset.
1. Press and hold the "Call Control" button on the M3000 until you hear
a beep in the headset. After a moment you will hear another beep in
the headset as a prompt for voice dialling and the phone display will
show "Speak Now"
2. State the name of the contact you wish to dial and the call will be
placed.
To place a call using Last Number redial
1. Double press the "Call Control" button in quick succession. The last
number dialled will be called.
6310i M3000 pair rev002
Plantronics Ltd - Released
3 24th July 2003