Plantronics M3000 Pairing Instructions page 16

Making and Accepting Calls
To accept an in-coming call via the M3000 Headset
1. An in-coming call will cause both the phone and the headset to ring.
Note that there may be a delay of a few seconds between the phone
ringing and the headset starting to ring.
2. When you hear the ringing tone in the M3000 headset, press the "Call
Control" button to answer the call.
If you press the "Call Control" button before the headset starts to ring, the
call may not be answered and an error tone will sound in the headset.
Once you hear this tone you can then press the "Call Control" button to
pick up the call.
To end a call via the M3000 Headset
The call can be ended either by pressing "Call End" on the P800 or by
pressing the "Call Control" button on the M3000.
To place a call using the keypad:
1. Dial the number as normal and press the "Call" key on the P800.
2. Press the "Call Control" button on the M3000 to transfer the sound to
the headset.
To place a call using Voice Dialing with the M3000 Headset:
NB: Before using the M3000 for voice dialling, ensure that you have
followed the instructions in the Sony Ericsson P800 User Guide for voice
dialling, and that you have recorded the names of the contacts you wish to
call via voice dialling. Place a test call from the P800 using voice dialling to
ensure that it is working before using the M3000 headset.
1. Press the "Call Control" button on the M3000, you hear a beep in the
headset. After a moment you will hear another beep in the headset as
a prompt for voice dialling and the phone display will show "Sound
Transferred to Headset"
2. State the name of the contact you wish to dial and the call will be
placed.
P800 M3000 pair rev001
Plantronics Ltd - Released
2
rd
3 July 2003