Positioning Your Projector; Choosing A Location - BenQ LW600ST User Manual

Positioning your projector

Choosing a location

Before choosing an installation location for your projector, take the following factors into
consideration:
• Size and position of your screen
• Electrical outlet location
• Location and distance between the projector and the rest of your equipment
You can install your projector in the following ways.
1. Front Table
Select this location with the projector placed
on the table in front of the screen. This is the
most common way to position the projector
for quick setup and portability.
3. Front Ceiling
Select this location with the projector
suspended upside-down in front of the screen.
Purchase the BenQ Projector Ceiling/Wall
Mount Kit from your dealer to mount your
projector.
After turning on the projector, go to Advanced Menu - Settings > Projector Installation and
press / to select a setting.
You can also use QUICK INSTALL on the remote control to access this menu.
12 Positioning your projector
2. Rear Table
Select this location with the projector placed
on the table behind the screen. Note that a
special rear projection screen is required.
4. Rear Ceiling
Select this location with the projector
suspended upside-down from behind the
screen. Note that a special rear projection
screen and the BenQ Projector Ceiling/Wall
Mount Kit are required for this installation
location.