Product Features - Dell UltraSharp U4924DW User Manual

Product features

The Dell U4924DW monitor has an active matrix, Thin-Film Transistor (TFT),
Liquid Crystal Display (LCD) and LED backlight. The monitor features include:
• 124.46 cm (49.00 in.) viewable area (measured diagonally). 
5120 x 1440 (32:9) resolution, plus full-screen support for lower resolutions.
• Wide viewing angle to allow viewing from a sitting or standing position.
• Color gamut of sRGB 100%, Rec.709 100%, DCI-P3 98%, and Display P3 98%
with an average Delta E < 2.
• Digital connectivity with DisplayPort, USB Type-C and HDMI (supports up to
DQHD 5120 x 1440 60 Hz FRL as per specified in HDMI 2.1).
• Single USB Type-C to supply power (PD 90 W) to a compatible notebook
while receiving video and data signal.
• Tilt, swivel, height adjustment, and slant adjust capabilities.
• Ultra-thin bezel minimizes the bezel gap in multi-monitor usage, enabling
easier setup with an elegant viewing experience.
• Removable stand and Video Electronics Standards Association (VESA™)
100 mm mounting holes for flexible mounting solutions.
• Equipped with:
•1 USB Type-C upstream port (video and data; DP1.4 with Alternate mode, PD
up to 90 W)
•1 USB Type-C upstream port (data only)
•2 SuperSpeed USB 10 Gbps (USB 3.2 Gen2) Type-C downstream ports
•1 SuperSpeed USB 10 Gbps (USB 3.2 Gen2) Type-A downstream charging
port
•4 SuperSpeed USB 10 Gbps (USB 3.2 Gen2) Type-A downstream ports
• USB-C and RJ45 ports enable a single-cable, network-connected experience.
• Plug and play capability if supported by your computer.
• On-Screen Display (OSD) adjustments for ease of set-up and screen
optimization.
• Supports Picture by Picture (PBP) and Picture in Picture (PIP) Select mode.
• The built-in KVM switch allows you to control up to 2 computers from a single
set of keyboard and mouse connected to the monitor.
• Supports Auto KVM for multiple input setup.
• Power and OSD buttons lock.
• Security-lock slot.
• Stand lock.
About your monitor
│
9