Magellan N476 User Manual page 15

C Bluetooth Displays the current pairing status of the Bluetooth connection. When
Status paired to a phone, the N476 receiver can be used as a remote interface
for your phone.
D SmartGPS- The N476 receiver uses your SmartGPS Eco account (created when
Eco Status registering the product) to sync content from SmartGPSEco to the
Magellan SmartRV receiver. Connection to SmartGPSEco can be from a
Wi-Fi network connection, a Bluetooth-paired phone or by connecting to a
PC utilizing the Magellan SmartGPSEco website.
E Page Status When the Map screen display is in split screen the Page Status icon
indicates which set of squares are being displayed. Swipe across the four
displayed squared to change the viewed squares.
F Traffic Signal To receive traffic signals you must be in an area where traffic signals are
Status being transmitted and you must be using an approved vehicle power
adapter. When the N476 receiver is turned on, it may take a minute or
more before any traffic information is displayed.
G Vehicle When the RV icon is shown, routing will take vehicle profile into account,
Profile such as weight, length, and width.
H Battery The battery status icon indicates the current battery charging condition.
Status
www.magellangps.com
Bluetooth is paired to a phone.
Bluetooth is not paired to a phone.
Content is being synced from SmartGPSEco using Wi-Fi, Bluetooth
or Magellan Content Manager.
The Magellan N476 receiver is connected to SmartGPSEco and
the content is analyzed to determine if a sync is required.
The Magellan N476 receiver is connected to SmartGPSEco but
all the content is up-to-date or there is no Wi-Fi, Bluetooth or
Magellan Content Manager connection.
Page 1 squares are displayed.
Page 2 squares are displayed.
Traffic information is being received.
No traffic information is being received.
The internal battery is fully charged.
The battery is connected to an external power source
and is charging.
N476 User Manual 3