Setting Up Your Housing; Opening The Housing; Installing The Camera - Ikelite 200DLM/A Manual

Underwater housing for sony alpha a6100, a6300, a6400, a6500 mirrorless cameras

Hide thumbs Also See for 200DLM/A:

Table of Contents

The AF/MF button is conveniently accessed by a thumb lever on the

side of the housing. Instead of half-pressing the shutter to obtain focus

and lock focus, press the AF/MF button.

For super macro photography, you can use this technique instead

of a manual focus gear. Press AF/MF to lock focus at the minimum

focusing distance of your lens. Then move slightly in or out until the

subject is in focus.

Setting Up Your Housing

1. Push the lid snap lock forward and lift the curved end away from

the housing.

2. Lid snaps are designed to provide enough force to compress the

o-ring for a proper seal. Keep firm pressure against the lid snap

while lifting it away.

3. Repeat with opposite lid snap.

4. Remove the housing back.

1. Remove any lanyard or neck strap which may be attached to the

camera.

Lock

Table of Contents

6911.64