CS10Prdct Info Bklt13.R2
TROUBLESHOOTING
I cannot hear dial tone
Make sure the telephone-
■
handset is off its cradle.
Make sure the remote
■
unit is within range of
the base unit.
Increase the listen volume
■
control.
Return the remote to the
■
charging well for 5 sec-
onds to re-establish a
communication link.
Make sure your remote
■
is securely seated in the
charging well and/or fully
charged.
Separate and then
■
reconnect the battery and
remote.
Check that all cords are
■
correctly connected and
firmly in place. Pay special
attention that handset and
telephone cords are prop-
erly connected.
12/27/01
4:23 PM
Page 13
Remove and replace
■
the AC power cord from
the base.
My remote stopped
working
Return the remote to
■
the charging well for
5 seconds to re-establish
a communication link.
Separate and then
■
reconnect the battery
and remote.
Remove and replace
■
the AC power cord from
the base.
Caller cannot hear
my voice
Adjust headset so the
■
voice boom is closer to
your mouth.
Make sure the mute button
■
is off.
Adjust the talk volume
■
control.
Try adjusting the transmit
■
level switch to position
2 or 1.
11