Table of Contents
Advertisement
en Familiarising yourself with your appliance
Other functions
This is where you can find an overview of other functions of your appliance.
Symbol
Function
Programme
Pyrolytic self-cleaning Set the cleaning function, which cleans the cooking compartment virtually inde-
Remote start
Note: If you operate your appliance with the
Home Connect app, even more functions are available
for you. You can find more information about this in the
app.
4.4 Temperature and setting levels
There are different settings for the types of heating and
functions.
The settings appear in the display.
The temperature can be set in 1 degree increments up
to 100 °C, and in 5 degree increments thereafter.
Note: For grill setting 3, the appliance lowers the set-
ting to grill setting 1 after approx. 20 minutes.
Heat-up indicator
The appliance indicates when it is heating up.
The line at the bottom of the display turns red from left
to right as the cooking compartment heats up.
When you are preheating the appliance, the optimal
time to place your food in the cooking compartment is
as soon as the entire line has turned red.
Residual heat indicator
If you switch off the appliance, the line on the display
shows the residual heat in the cooking compartment.
The lower the temperature in the cooking compartment,
the less the line is filled.
Notes
¡ The heat-up indicator will only show the temperature
increasing for types of heating for which a temperat-
ure is set. For grill settings, for example, the heat-up
indicator shows a full line from the beginning.
¡ If the temperature in the cooking compartment is
too high when the appliance is started, appears in
the display for some types of heating. Switch off the
appliance and allow it to cool down. Then restart op-
eration of the appliance.
¡ Due to thermal inertia, the temperature displayed
may differ slightly from the actual temperature inside
the cooking compartment.
8
Use
Use programmed setting values for various types of food.
→ "Programme", Page 14
pendently.
→ "Pyrolytic self-cleaning ", Page 23
Start and operate the appliance via the Home Connect app. → Page 19
Home network and Home Connect server connected
¡
The number of lines shows the signal strength of the home network
Home network not connected
¡
Home Connect server not connected
¡
Remote start activated
¡
Remote diagnostics activated
¡
4.5 Cooking compartment
The functions in the cooking compartment make your
appliance easier to use.
Shelf supports
The shelf supports in the cooking compartment enable
you to place accessories at different heights.
→ "Accessories", Page 9
Your appliance has five shelf positions. The shelf posi-
tions are numbered from bottom to top.
Depending on the appliance, the shelf supports are fit-
ted with pull-out rails or clip-on pull-out rails. The pull-
out rails are fixed in place and cannot be removed. The
clip-on pull-out rails allow you to use them as you wish
at all free shelf positions.
You can remove the shelf supports, e. g. for cleaning.
→ "Shelf supports", Page 24
Lighting
The oven light lights up the cooking compartment.
With most types of heating and functions, the lighting
lights up during operation. The lighting goes off when
operation ends.
You can switch on the lighting without heating the oven
using the Oven light button.
Cooling fan
The cooling fan switches on automatically during oper-
ation. The hot air escapes above the door.
Advertisement
Table of Contents
