Bosch HB 78 6B Series User Manual And Installation Instructions page 25

Keep the PUSH tab pushed back
2.
rail outwards ​ ⁠ .
Pull the rail out towards the front until the retainer at
3.
the back unhooks.
Remove the pull-out rail.
4.
Clean the pull-out rail.
5.
→ "Cleaning products", Page 21
18.4 Attaching the pull-out rail
Note: The pull-out rails only fit on the right or left. Make
sure when you fit them that you can pull them out to-
wards the front.
​ ⁠ and swing the
1.
2.
3.
a The retainer
4.
Insert the pull-out rail between the two bars.
Push the retainer ​ ⁠ in between the lower and the
upper bar.
Keep the PUSH tab pushed in
out rail inwards until the front retainer
between the two bars
Release the PUSH tab.
‒
​ ⁠ clicks into place.
Pull the pull-out rail out as far as it will go and slide
it back in.
Shelf supports en
​ ⁠ and swing the pull-
​ ⁠ is located
​ ⁠ .
25