Table of Contents
Advertisement
Making Automatic Scope Measurements
The test tool offers a wide range of automatic scope
measurements. In addition to the waveforms you can
display four numeric readings: R
readings are selectable independently, and the
measurements can be done on the input A , input B, input
C or input D waveform
To choose a frequency measurement for input A, do the
following:
1
Display the
SCOPE
2
Open the READING .. menu.
F2
3
Select the reading number to be
F1
displayed, for example R
4
Select on A. Observe that the
highlight jumps to the present
ENTER
measurement.
1 ... 4. These
EADING
key labels.
SCOPE
1
EADING
Using the Scope and Meter
Making Automatic Scope Measurements
5
Select the Hz measurement.
ENTER
Observe that the top left of the screen displays the Hz
measurement. (See Figure 8.)
To choose also a Peak-Peak measurement for Input B as
second reading, do the following:
1
Display the
SCOPE
Open the READING .. menu.
2
F2
Select the reading number to be
3
F1
displayed, for example R
Select on B. The highlight jumps
4
to the measurements field.
ENTER
1
key labels.
SCOPE
2
EADING
19
Advertisement
Table of Contents
