LG MW-71PY10 Service Manual page 7

Accessory
Ensure that the following accessories are included with your plasma display. If an accessory is missing, please contact the dealer
where you purchased the product.
Owner's Manual
MODE
PIP
MUTE SLEEP
VOL CH
WIN. POSITION SPLIT ZOOM
WIN. SIZE
ENTER
MENU EXIT
PIP INPUT ARC
PLAY PAUSE STOP RECORD
REW FF SKIP
VIDEO COM1 COM2 RGB
DVI HDMI KEY LOCK INDEX
Remote Control
Alcohol
(MW-71PY10G only )
CAUTION
CAUTION concerning the Power Cord :
Most appliances recommend they be connected to a dedicated circuit; that is, a single outlet circuit which powers only
that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be
certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power
cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire.
Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, dis-
continue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.
Use a dedicated power cord. Do not modify or extend the power cord.
Do not install, remove, or reinstall the unit by yourself (customer).
For electrical work, contact the dealer, seller, a qualified electrician, or an Authorized Service Center. For installation,
always contact the dealer or an Authorized Service Center.
Do not use if the power cord or plug is damaged, or socket is loose. Use a dedicated outlet for this appliance.
Do not over bend the power cord and do not place anything on the power cord. Do not install the monitor near any sharp
edge to avoid wire damage.
Safety instruction (MW-71PY10G only)
When the trim becomes dirty or stained, softly polish the surface. (Use the soft cloth and alcohol supplied with this product.)
When polishing the surface, use gentle pressure. Heavy pressure can damage or discolor the surface.
Clean the surface quickly and use gentle pressure. Heavy pressure can damage or discolor the surface.
Keep the alcohol and the used cleaning towel out of the reach of children.
Carefully read all of the safety instruction on the alcohol receptacle.
Do not use anything to scrape or scratch at the surface of this unit, this will cause damage to the surface.
Use soft gloves while installing or removing this unit to prevent damaging the surface.
1.5V
Batteries
D-sub 15 pin cable
Soft cloth
(MW-71PY10G only )
- 7 -
Power Cord
DVI computer cable