Advertisement
Parasol Wireless Speaker with LED Light
1
Unscrew and pull down middle section and attach the Wireless speaker here.
Charging:
• Charge for 2-4 hours for the 1st charge.
• Plug the adapter in the charging port and
plug into the power supply (100-240V).
• We recommended 1.2amp maximum
output. Anything over this continuous use
could result in reduced life span of the
battery.
• When charging the red light will light up and
go off when fully charged.
• Always charge in a dry environment.
User guide:
• To turn on, hold down the wireless switch for
3 seconds.
• Turn on your device's Wireless function and
search for "Kettler".
• The run time is approx. 6-10 hours.
• To turn the light on/off press the "LIGHT"
button.
2
1
Functions
2
3
1. Bluetooth Switch
2. LED Light Power Switch
4
3. Unlock Button
4. LED Light
5. Charging Port
5
3
Warning:
• Wireless connectivity will turn off when not
used for 15 minutes.
• The sound quality will be reduced when the
battery is low.
• Use wirelessly for upto 8-10metre range. Any
more than this will affect the sound quality.
• Only one device can be connected at any
one time.
• Do not allow the speaker unit to get wet.
• Store in a dry place when not in use.
4
Advertisement
