Table of Contents
Advertisement
Touch Screen Driver Installation
The PT1945R/PT1945RW is available with both RS232 and USB connections. The touch
driver is located on the enclosed CD-ROM for these operating systems: Windows
64/32 bits, XP, 2000, ME, 98, NT 4.0, CE, XP Embedded, Linux, Apple
Please Note: The PT1945R/PT1945RW is Microsoft
Device) compatible if you use the USB touch screen interface. No additional software driver
is required for general operation of the touch screen. A calibration tool can be installed for
improved touch position accuracy. See "Optional Calibration Tool Install" section for more
information.
PT1945R/PT1945RW Optional Calibration Tool Install:
If you would like to use the Optional Calibration Tool, follow the instructions below. Please
note: the calibration tool supports Windows
operating systems via USB only.
1. Open the CD-ROM.
2. Select the monitor size and then model name.
3. Click on the "Load Utility" button that appears to the right of the model name.
4. The HID calibration tool will automatically open. From here the user can choose to do
the following:
a.
4 Points Calibration
b.
9 Points Linearization
c.
25 Points Linearization
d.
Clear
e.
Draw Test
f.
Advanced. In the Advanced settings area the user may do the following:
i.
Adjust the Double Click Area.
ii.
Enable auto right click and adjust the auto right click time.
iii.
Choose to be either in the HID Mouse Mode or HID Digitizer Mode (Windows
Vista only).
iv.
Simply click the "Apply" button once the settings are finalized.
®
Windows
7, VISTA, XP, XP Embedded, 2000, 98 and ME
®
21
®
7, VISTA
®
Mac OS.
®
HID (Human Interface
®
Advertisement
Table of Contents
