Touch Screen Driver Installation; Pt1545R Optional Calibration Tool Install - Planar PT1545R User Manual

Touch screen monitor
Hide thumbs Also See for PT1545R:
Table of Contents

Advertisement

Touch Screen Driver Installation

The PT1545R is available with both RS232 and USB connections. The touch driver is
located at www.planar.com/support for these operating systems: Windows® 7/8, VISTA, XP,
2000, ME, 98, NT 4.0, CE, XP Embedded, Linux kernel 2.6.x (32 bit & 64 bit),
Apple® Mac OS.
The PT1545P is available with USB connection. The touch driver is available at www.planar.
com/support for these operating systems: Windows® 7/8, VISTA, XP, 2000, CE,
XP Embedded, Linux kernel 2.6.x (32 bit & 64 bit), Apple® Mac OS. (Windows 7/8 Multi
touch without driver)
Please Note:
1. The PT1545R/PT1545P is Microsoft® Windows® HID (Human Interface Device)
compatible if you use the USB touch screen interface. No additional software driver is
required for general operation of the touch screen. A calibration tool can be installed for
improved touch position accuracy. See "Optional Calibration Tool Install" section for more
information.
2. For PT1545P, the system requires 15 seconds for Windows 7/8 to process the touch
program while turning power on/off or plugging/unplugging USB cable.

PT1545R Optional Calibration Tool Install:

If you would like to use the Optional Calibration Tool, follow the instructions below. Please
note: the calibration tool supports Windows® 7/8, VISTA, XP, XP Embedded, 2000, 98 and
ME operating systems via USB only.
1. Visit www.planar.com/support
2. Select the model name, part number and operating system.
3. Click on "Calibration Utility".
4. The HID calibration tool will automatically open. From here the user can choose to do
the following:
a.
4 Points Calibration
b.
9 Points Linearization
c.
25 Points Linearization
d.
Clear
e.
Draw Test
f.
Advanced. In the Advanced settings area the user may do the following:
i.
Adjust the Double Click Area.
ii.
Enable auto right click and adjust the auto right click time.
iii.
Choose to be either in the HID Mouse Mode or HID Digitizer Mode
(Windows® 7/8, Vista).
i v.
Simply click the "Apply" button once the settings are finalized.
20

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pt1545p

Table of Contents