Touch Screen Driver Installation - Planar PT1910MX User Manual

Touch Screen Driver Installation

Driver Installation Process:
1. Before you start to install the touch driver, please be sure the USB or the
RS-232 Serial cable is connected from the PC to the LCD display.
2. Uninstall any touch screen driver that may be on your system.
3. Click on the driver link found on the CD-ROM.
4. Follow instructions as found below.
5. After installation is complete, click "Finish" and restart your computer to
complete installation.
PT1910MX Driver Install:
Please Note: The PT1910MX is available with both RS232 and USB
connections. The touch driver is located on the enclosed CD-ROM for these
OS: Windows® VISTA 64/32 bits, XP, 2000, ME, 98, XP Embedded, Linux,
WinCE.NET. If you are using RS232 connection, follow the instructions below:
1. Be sure that RS232 cable is connected to the computer.
2. Power on the computer.
3. Load the touch screen driver CD.
4. Follow the step-by-step instructions as shown on pop-up windows.
If you are using USB connection on a PC running Windows
instructions below:
1. Be sure that USB cable is connected to the computer.
2. Power on the computer.
3. No need to install USB driver from the CD as it is a HID device. The system
will recognize the HID device and load the driver automatically.
19
®
VISTA, follow the