Related Manuals for ACF Greenhouses Grow More Shade Net Kit 6.5'
Summary of Contents for ACF Greenhouses Grow More Shade Net Kit 6.5'
- Page 1 Assembly Instructions Model: Shade Net Kit 6.5’ Item No. 2532100 Customer Support Support@ACFgreenhouses.com 1-888-888-9050...
-
Page 2: Parts List
PARTS LIST Stage 1 Stage 2 NO. Qty. NO. Qty. PART PART L02A L03A L03B M6X10 Ø5X16 Ø4X16 IMPORTANT: *Please read these instructions carefully before assembling. *Please keep these instructions for future reference. Tools Required: *Screwdriver *Drill *Spanner... - Page 3 Stage 1 Each section of shading kit is in 2m modules (see page 4 for installation of additional modules). L01A L01A L01A Insert L01A into the hem of the shading material. L02A L02A L02A Insert into the channel of L02A.
- Page 4 NO. Qty. PART Stage 2 L02A Ridge brackets (L03A) and Eave brackets (L03B) are to be placed 300mm from the end of each Greenhouse ridge and eave profile. Drill 8 holes through L03A into the ridge frame and also drill 8 L03A holes through L03B into the gutter/eave profile (refer to figures shown).
- Page 5 IMPORTANT! Pay attention to this small hole which should face up and to the right side. Shading Cloth L02A Insert the W02 part into L02A at each end of the shading rod. Then assemble the rope and spring tensioner to hold the shade cloth firmly in place. It is important the shading material is taut over the Greenhouse.
- Page 6 Assembly instructions for 4m shading kit Ridge brackets (L03A) and Eave brackets (L03B) are to be placed 300mm from the end of each Greenhouse ridge and eave profile. Drill 8 holes through L03A into the ridge frame and also drill 8 holes through L03B into the gutter/eave profile (refer to figures shown).
- Page 7 Shading Cloth IMPORTANT! Pay attention to this small hole which should face up and to the right side. L02A L02A 17 18 Insert the W02 part into L02A at each end of the shading rod. Then assemble the rope and spring tensioner to hold the shade cloth firmly in place.