Advertisement
INTRODUCTION
Based on the circuit design of our celebrated RPQ2, the RPQ3
features a powerful combination of ultra-low noise, low-distortion
op-amps, ultra-high 68 kΩ input impedance, and 85 dB of clean
gain, all packaged in a durable full-rack chassis. The RPQ3 also
includes an expanded EQ section with boost and cut controls for
both low and high end as well as a new low-end frequency sweep
to identify and eliminate rumbles and resonances. The RPQ3 was
designed to work great on passive ribbon microphones, however,
when a preamp works well with a passive ribbon microphone, it
will excel on every microphone. At once open, transparent, and
musical, the RPQ3 is a versatile tool for the front end of any signal
path. As with all AEA electronics, the circuit in the RPQ3 was
designed by Fred Forssell.
WARRANTY
Your RPQ3 comes with a one-year
limited warranty on parts and labor*.
Registering your preamp within 90 days
will extend the warranty to three (3) years.
Scan the QR code or visit our
register.
*AEA is not responsible for shipping costs
SUPPORT
If you should encounter any problems with your preamp or have
questions regarding using the RPQ3 in specific applications,
please contact our customer support team at
support@ribbonmics.com
To contact us by phone, please call 626-798-9128 from 9:00 a.m.-
5:00 p.m. PST Monday-Friday. AEA's repair center is located at
1029 N. Allen Ave, Pasadena, CA 91104, U.S.A.
website
to
for the quickest response.
4
Advertisement
