Introduction; Warranty; Support - AEA TRP3 Owner's Manual

INTRODUCTION

The TRP3 is a half-rack, two-channel, high gain and high impedance
microphone preamp. Specifically designed for ribbon
microphones, the TRP3 (The Ribbon Preamp) excels at drawing out
the warmth and lush sound ribbons are uniquely known for.
However, when a preamp works well with a passive ribbon
microphone, it will excel on every microphone. With 85 dB of sweet
JFET gain, the TRP3 delivers the quietness and headroom needed
for today's high-resolution recordings. The TRP3 is a cost-effective,
high-quality solution providing a pure and transparent signal path
for all ribbons, condensers, and moving coil microphones. The
TRP3's combination of ultra-low noise, low-distortion op-amps,
ultra-high 68 kΩ input impedance, and 85 dB of clean gain
provides all the dynamics, subwoofer bass, and fast transients that
your microphones can deliver. As with all AEA electronics, the
circuit in the TRP3 was designed by Fred Forssell.

WARRANTY

Your TRP3 comes with a one-year
limited warranty on parts and
labor*. Registering your preamp
within 90 days will extend the
warranty to three (3) years. Scan the
QR code or visit our website to
register.
*
AEA is not responsible for shipping costs

SUPPORT

If you should encounter any problems with your preamp or have
questions regarding using the TRP3 in specific application, please
contact our customer support team at
To contact us by phone, please call 626-798-9128 from 9:00 a.m.-
5:00 p.m. PST Monday-Friday. AEA's repair center is located at
1029 N. Allen Ave, Pasadena, CA 91104, U.S.A.
support@ribbonmics.com.
4