AEA RPQ3 Owner's Manual page 6

FRONT PANEL GUIDE
⬆ ⬆
1 2 3 4 5 6 7 8 9
1 - Insert switch:
OUT is Mic Input mode; IN is Insert mode which sends the
preamp signal out the Line Out ¼" jack and switches the pre-
eq input to the Line Input ¼" jack on the rear of the unit. The
LED below the switch will indicate when the insert is engaged.
2 - Mic Gain rotary switch:
This twelve-position switch selects from +7 dB to +65 dB of
preamplifier gain.
3 - Phantom Power (P48) switch:
OUT is off; IN applies full-spec P48 phantom power to the
input. The red LED below the switch will indicate when P48
phantom power is engaged.
4 - Polarity Invert switch:
OUT is normal; IN is inverted.
5 - Output Level control:
This continuously variable control provides up to +20 dB
additional output gain following the optional CurveShaper™
EQ circuitry. Fully counter-clockwise -- 0 dB -- indicates unity.
6 - EQ IN switch:
OUT bypasses the EQ circuitry; IN engages the EQ circuitry.
Note, the LF (ref. #8) and/or HF (ref. #11) must also be engaged
to use the EQ. The EQ IN switch allows for easy A/Bing with
and without EQ.
⬆ ⬆ ⬆ ⬆⬆⬆ ⬆ ⬆ ⬆ ⬆
10 11 12
6
⬆ ⬆⬆
13 14 15