Download Print this page

Bestway 51004E Owner's Manual page 2

Advertisement

PRODUCT DESCRIPTION
Item
51004E; 51005E; 51008E; 51009E;
51024E; 51025E; 51026E; 51027E;
51033E; 51061E; 51103E; 51104E;
51112E; 51115E; 51128E; 51130E;
51144E; 51145E; 51202E; 51203E;
55021E; 93205E; 93403E; 91007E;
91099E; 51038E; 51045E; 54153E;
51132E; 51080E; 51117E; 54005E;
54006E; 54009E; 54066E; 51131E;
54336E; 54337E; 54158E; 54150E;
54134E; 54120E; 54121E; 51041E;
51042E; 51043E; 51048E; 51121E;
51122E; 54117E; 54118E; 54244E;
54321E; 54409E; 54422E; 54423E;
54426E
51085E; 51141E
93501E
51120E; 51124E
54122E
Refer to the item name or number stated on the packaging. Packaging
must be read carefully and kept for future reference.
PREPARATION
Installation of small swimming pool usually takes only 10 minutes with
1 people.
Recommendations regarding placement of the pool:
Do not install the pool on a slope or inclined surfaces, on soft or loose
soil conditions (such as sand or mud), or on an elevated surface such
as a deck, platform or balcony, which may collapse under the weight of
the filled pool.
• It is essential the pool is set up on solid, level ground. If the pool is
set up on neven ground it can cause collapse of the pool and
flooding, causing serious personal injury and/or damage to personal
property.
• Do not set up on driveways, decks, platforms, gravel or asphalt.
Ground should be firm enough to withstand the pressure of the water;
mud, sand, soft / loose soil or tar are not suitable.
• The ground must be cleared of all objects and debris including stones
and twigs.
• Check with your local city council for by-laws relating to fencing,
barriers, lighting and safety requirements and ensure you comply with
all laws.
ASSEMBLY
1. Take the pool and accessories out of the carton with care and
spread out the pool on to the selected site.
2. To inflate the pool, start from the bottom chamber and work your
way to the top chamber and close the safety valves after inflation.
Do not over-inflated your pool.
3. Slowly fill the pool to a proper water level, if there is a fill line, reach
but do not exceed the fill line on the pool's interior. DO NOT
OVERFILL as this could cause the pool to collapse.
ATTENTION: Do not leave pool unattended while filling with water.
©2022 Bestway Inflatables & Material Corp.
All rights reserved
Trademarks used in some countries under license from Bestway Inflatables & Material Corp., Shanghai, China
Exported by Bestway (Hong Kong) International Ltd./Bestway Enterprise Company Limited
Suite 713, 7/Floor, East Wing, Tsim Sha Tsui Centre, 66 Mody Road, Kowloon, Hong Kong
Distributed in North America by Bestway (USA) Inc., 3435 S. McQueen Road, Chandler, AZ 85286, United States of America
Tel: +86 21 69135588
www.bestwayusa.com
Part
• Pool
• Repair patch
• Pool
• Repair patch
• 50 balls
• Pool
• Repair patch
• 25 balls
• Pool
• Repair patch
• Swim ring
• Beach ball
• Pool
• Repair patch
• 2 balls
Proper Water Level
NOTE: All drawings for illustration purpose only. May not reflect actual
product. Not to scale.
EMPTY THE POOL
1. Check local regulations for specific directions regarding disposal of
swimming pool water.
2. Deflate all the air chambers, at the same time push down the wall of
the pool to release the water.
NOTE: Drain by adult only!
POOL MAINTENANCE
WARNING: If you do not adhere to the maintenance guidelines covered
herein, your health might be at risk, especially that of your children.
• Change the water of pools frequently (particularly in hot weather) or
when noticeably contaminated, unclean water is harmful to the user's
health.
• Please contact your local retailer to obtain chemicals to treat the
water in your pool. Be sure to follow the chemical manufacturer's
instructions.
• Proper maintenance can maximize the life of your pool.
• See packaging for water capacity.
CLEANING AND STORAGE
1. After use, use a damp cloth to gently clean all surfaces.
NOTE: Never use solvents or other chemicals that may damage the
product.
2. Air dry the pool, once pool is completely dry, fold pool carefully and
put back to its original packing. If pool is not completely dry, mould
may result and will damage the pool.
3. Store in a cool, dry place and out of children's reach.
4. Check the product for damage at the beginning of each season and
at regular intervals when in use.
REPAIR
If your pool is damaged, use the repair patch.
1. Complete deflate the product damaged area.
2. Clean and dry the damaged area.
3. Apply the repair patch and smooth out any air bubbles.
303021292380

Advertisement

loading

This manual is also suitable for:

51005e51008e51009e51024e51025e51026e ... Show all