Installation Checklist; Before Using The Dryer - Samsung DV9 M52 Series User Manual

Heat pump dryer
Hide thumbs Also See for DV9 M52 Series:
Table of Contents

Advertisement

Installation checklist

• The dryer is plugged into a properly grounded outlet.
• All packaging material is completely removed and properly disposed.
• The dryer is level and standing firmly on the floor.
• Start the dryer to make sure that it runs, heats, and shuts off.
• Run a TIME DRY cycle for 20 minutes to see if the HC information code is displayed. If
this is the case, contact a local service center.
• After installation, we recommend that you wait at least 1 hour before using the dryer.

Before using the dryer

• Make sure no accessory remains inside the drum.
• Plug in the power cord just before operating the dryer.
• Do not block the air inlet hole of the cooling grill at the front of the dryer.
• Do not place inflammable objects near the dryer and keep the surroundings clean.
• Keep the dryer level with the ground.
• Do not remove the adjustable levelling legs of the dryer. They are necessary to keep
the dryer level with the ground.
Untitled-2 23
This port is used only for software updates
as part of servicing.
English 23
2017-03-20
6:23:11

Advertisement

Table of Contents
loading

Table of Contents