Table of Contents
Advertisement
Over a wash basin:
Untitled-2 21
2. Insert one end of the accessory hose
3. Insert the other end (outlet) of the
A
1. Make sure to place the end of the
2. To bend some point of the accessory
A
3. You can drain the condensed water by
Do not extend the drain hose. Water may
leak from the connected area. Use a long
B
C
drain hose.
(long drain hose) into hole (A).
accessory hose to the drainage system
in one of the following ways:
accessory hose lower than 90 cm (*)
from the bottom of dryer.
hose, use the supplied plastic hose
guide (B) and secure the guide to the
wall with a hook or to the tap with a
piece of string. Assemble the drain hose
(A) and the hose guide (B) and fix them
with the cable-tie (C).
connecting the accessory hose (long
drain hose) to the drain-outlet directly.
CAUTION
English 21
2017-03-20
6:23:10
Advertisement
Table of Contents
