Storage; Cleaning; Brush Removal And Replacement - Lincoln Electric VANTAGE 400-I Operator's Manual

VANTAGE ® 400-I
STORAGE: Store in clean, dry protected areas.
CLEANING: Blow out the generator and controls periodically
with low pressure air. Do this at least once a week in particularly
dirty areas.
BRUSH REMOVAL AND REPLACEMENT: It's normal
for the brushes and slip rings to wear and darken slightly.
Inspect the brushes when a generator overhaul is necessary.
CAUTION
• Do not attempt to polish slip rings while the
engine is running.
WARNING
• Service and Repair should only be performed by
Lincoln Electric Factory Trained Personnel.
Unauthorized repairs performed on this equip-
ment may result in danger to the technician and
machine operator and will invalidate your factory
warranty. For your safety and to avoid Electrical
Shock, please observe all safety notes and pre-
cautions.
--------------------------------------------------------------------
D-6
MAINTENANCE