Planar GX40 User Manual page 56

1024x768, but it has a different requirement for Black and
White Level. In this case, the GX40 would use the default
values for these levels.
To prevent this from happening, use the memory slots to
save this specific configuration as described in "Saving and
Recalling Configurations" on page 43.
Switching input connectors
Now suppose you use to bring in a picture that uses the
component YPbPr video. You change the Colorspace set-
ting to YPbPr. If you switch back to Analog in the Picture
menu, the GX40 switches back to the RGB Colorspace,
because Colorspace is specific to the input connector.
Possible issue with Input specific memory
What happens if you switch back to Analog and the pic-
ture there is YPbPr? The GX40 has no way to know this, no
way to detect the difference between RGB and YPbPr, so it
will use the wrong Colorspace.
To prevent this from happening, use the memory slots to
save this specific configuration as described in "Saving and
Recalling Configurations" on page 43.
Global parameters
In none of the examples above does the GX40 try to
change the Baud Rate or the Color Balance values, because
these items are saved globally.
51