Table of Contents
Advertisement
1.0
INTRODUCTION
1.1
PRE-INSTALLATION NOTES
Read this manual thoroughly before installation
and using the windlass. Failure to adhere to the
correct
procedures,
guidelines described in this Owner's Manual may
invalidate the warranty.
Be mindful that the correct selection of windlass
for each application, together with correct
installation, normal care in use and maintenance,
are
essential
for
performance.
Inspect your windlass carefully when unpacked.
Any damage or lack of components should be
reported immediately to your VETUS-Maxwell
distributor.
The windlass is supplied with chainwheel, as
specified on purchase order. Make sure it is the
appropriate one for the chain being used on
board. Correct fit of the chain to chainwheel is
essential for reliable and safe operation of the
windlass. This can be guaranteed only when
calibrated chain to a recognised international
standard is used and the chain is correctly
identified to VETUS-Maxwell, or if a chain
sample is provided to VETUS-Maxwell to
develop a custom chainwheel.
The windlass is designed for use in conjunction
with chain stopper of the appropriate size. Their
use is an important safety feature.
For side pocket anchors, a chain roller should be
installed above the hawse pipe to ensure smooth
and quiet travel of the chain from deck to hawse
pipe. The roller requires a central groove to align
chain and flat faces (for longer chains) to support
and avoid bending the chain links.
The connection of the power lines and control
circuitry to the windlass must be done by skilled
technicians,
to
ensure
operation of the windlass.
2
recommendations
and
long
life
and
reliable
reliable
and
safe
2500 HWC
VETUS-Maxwell APAC Ltd
Advertisement
Table of Contents
