Adjusting The Saddle Position - IDEAL Bikes TARGET Instructions For Use Manual

Clamp with clamp screw
1
Fig. 15: Adjusting the saddle height (clamp with clamp screw)
1. Turn the clamp screw in an anti-clockwise direction until the seat post can be moved
in the seat tube.
2. Adjust the seat post to the required height.
- When doing this, observe the minimum insertion depth of the seat post.
3. Once you have adjusted the saddle to the correct height, align the saddle in a straight
line with the frame.
4. To secure the saddle in position, turn the clamp screw in a clockwise direction and
tighten.
- When doing this, observe the torque of the clamp screw
5. Check whether the saddle can be rotated.
- If you can rotate the saddle, check the seat post clamp.

38.2 Adjusting the saddle position

1
Fig. 16: Adjusting the saddle position
1. Release the screws on the seat post in an anti-clockwise direction.
2. Tilt and move the saddle to the desired position.
3. To secure the saddle in position, tighten the screws on the seat post in a clockwise
direction.
- When doing this, note the torque of the screws
4. Check whether the saddle can be rotated.
- If the saddle can be rotated, contact your specialist dealer.
1
˃ Chap. 12.1 on page
SADDLE
1
Clamp with clamp screw
˃ Chap. 12.1 on page
1
Screws
25.
25.
59