Before First Use; Familiarising Yourself With The Bicycle; Checking The Bicycle Before You Start Riding - IDEAL Bikes TARGET Instructions For Use Manual

BEFORE FIRST USE

Your specialist dealer has fully assembled the bicycle, made all the necessary adjustments
based on your height and weight, and explained to you how to operate and use the
components.
Your bicycle is thus ready to use.

15 Familiarising yourself with the bicycle

• Practice riding your new bicycle away from road traffic before embarking on longer
rides with your bicycle and/or riding on the road.
- Familiarise yourself with the riding characteristics of your bicycle.
- Try the brakes by braking at a low speed initially. Once you feel confident doing this,
increase the speed and try different braking manoeuvres.
- Shift through the different gears and familiarise yourself with the riding characteristics
of the bicycle in each gear. You should be able to shift gears in such a way that it does
not distract your attention from road traffic.
- Make sure that the adjusted sitting position is also comfortable for longer distances
and that you are able to operate the brake lever and operating elements on the
handlebar safely and easily while riding.
• Bed-in the disc brakes, if necessary
˃ Chap. 23.3 "Bedding in disc brakes" on page
• If you wish to change the preset position of the brake levers for the front wheel or rear
wheel brake, have them repositioned by your specialist dealer.

16 Checking the bicycle before you start riding.

Perform the checks described here before every ride.
• Before setting off, check that the components listed below are working properly and
are undamaged.
• Contact your specialist dealer to have the components replaced if you notice that:
- the function of the components is impaired,
- the component is damaged,
- the component shows signs of excessive wear.
30
BEFORE FIRST USE
41.